Passtcert provide candidates participating in the IT certification exams the information they want to help them pass the exam. Do you still worry about passing Network Appliance certification NS0-158 exam? Have you thought about purchasing an Network Appliance certification NS0-158 exam counseling sessions to assist you? Passtcert can provide you with this convenience. Passtcert Netapp Certification NS0-158 exam questions pdf can help you pass the certification exam. Passtcert exercises are almost similar to real exams.
There are different ways to achieve the same purpose, and it's determined by what way you choose. A lot of people want to pass Network Appliance certification NS0-158 exam to let their job and life improve, but people participated in the Network Appliance certification NS0-158 exam all knew that Netapp Certification NS0-158 exam questions pdf are not very simple. In order to pass Network Appliance certification NS0-158 exam some people spend a lot of valuable time and effort to prepare, but did not succeed.
Share some Network Appliance NCDA Certification NS0-158 exam questions and answers below.
A customer wants to use jumbo frames on an interface group called a0a. Interface group a0a contains ports e0c and e0d. Additionally, the customer is using VLAN tagging for VLANs 510 and 520. VLAN 510 will use jumbo frames but VLAN 520 will not. When the customer tries to enable jumbo frames on a0a-510 the command fails.
What caused the failure?
A. The MTU size must be set on the broadcast domain to which the ports belong.
B. The LIF corresponding with VLAN 510 is not configured for jumbo frames.
C. Ports e0c and e0d have conflicting MTU sizes configured.
D. Jumbo frames must be enabled from the advanced privilege set.
Answer: A
Which two methods would be used to change root-data partitioning on an FAS2500? (Choose two.)
A. OnCommand System Manager
B. command line interface
C. System Setup
D. OnCommand Unified Manager
Answer: B,C
In the storage failover command, what does the bypass-optimization option do?
A. It takes over the partner node without performing aggregate relocation.
B. It migrates all logical interfaces during takeover.
C. It takes over without migrating all logical interfaces.
D. It takes over the partner node performing aggregate relocation.
Answer: A
A customer¡¯s Linux Oracle database requires a SAN solution with multiple FC connections for path resiliency and performance. The host has been provisioned with two dual-port FC HBAs, and each HBA is connected to each fabric.
Before configuring the storage, what host information should the storage administrator obtain from the customer? (Choose two.)
A. if the FC HBAs ports are all configured for an active/passive configuration.
B. the amount of cache memory installed in the host
C. if the DM-MP with ALUA support is configured on the host
D. the WWPNs of all the FC ports in the host
Answer: C,D
A customer has LUNs that are being accessed through iSCSI. The applications have experienced increased LUN latency over the last couple of days.
Which two components should you review to determine what caused the rise in latency? (Choose two.)
A. node CPU utilization
B. FC switch performance
C. Ethernet network performance
D. cluster management switch performance
Answer: A,C
Which NetApp management tool generates reports on volume storage capacity trending information?
A. Virtual Storage Console
B. OnCommand Unified Manager
C. OnCommand System Manager
D. OnCommand Workflow Automation
Answer: B
Clustered Data ONTAP supports which three versions of NFS? (Choose three.)
A. NFSv4.1
B. NFSv4
C. NFSv3
D. NFSv2
E. NFSv1
Answer: A,B,C
When assigning shelf IDs to SAS-connected shelves, which statement is true?
A. They only need to be unique within an HA pair.
B. They only need to be unique within a stack.
C. They only need to be unique within a node.
D. They need to be unique within a cluster.
Answer: A
Which command would you use to disable an account in clustered Data ONTAP?
A. security login lock
B. security login policy
C. security login domain-tunnel
D. security login modify
Answer: A
You create an SVM named svm7. Its DNS name is ntap7. In svm7, you create a volume named vol1 with a junction path of /users.
An NFS client would mount the root of vol1 using which path?
A. svm7:/users
B. ntap7:/users
C. ntap7:/vol1
D. svm7:/vol1
Answer: B
Your company just purchased four additional FAS8060 nodes to add to an existing 12-node NAS cluster made up of FAS6290s.
After joining the four new nodes, how many more nodes are allowed before you reach the maximum supported configuration for a mixed FAS6290/8060 cluster?
A. 8
B. 2
C. 4
D. 16
Answer: A
If you also use Passtcert Netapp Certification NS0-158 exam questions pdf, we can give you 100% guarantee of success. If you do not pass the exam, we will refund the full purchase cost to you. For the vital interests of the majority of candidates, Passtcert is absolutely trustworthy.If you have decided to participate in the Network Appliance NS0-158 exam, Passtcert is here. We can help you achieve your goals.
There are different ways to achieve the same purpose, and it's determined by what way you choose. A lot of people want to pass Network Appliance certification NS0-158 exam to let their job and life improve, but people participated in the Network Appliance certification NS0-158 exam all knew that Netapp Certification NS0-158 exam questions pdf are not very simple. In order to pass Network Appliance certification NS0-158 exam some people spend a lot of valuable time and effort to prepare, but did not succeed.
Share some Network Appliance NCDA Certification NS0-158 exam questions and answers below.
A customer wants to use jumbo frames on an interface group called a0a. Interface group a0a contains ports e0c and e0d. Additionally, the customer is using VLAN tagging for VLANs 510 and 520. VLAN 510 will use jumbo frames but VLAN 520 will not. When the customer tries to enable jumbo frames on a0a-510 the command fails.
What caused the failure?
A. The MTU size must be set on the broadcast domain to which the ports belong.
B. The LIF corresponding with VLAN 510 is not configured for jumbo frames.
C. Ports e0c and e0d have conflicting MTU sizes configured.
D. Jumbo frames must be enabled from the advanced privilege set.
Answer: A
Which two methods would be used to change root-data partitioning on an FAS2500? (Choose two.)
A. OnCommand System Manager
B. command line interface
C. System Setup
D. OnCommand Unified Manager
Answer: B,C
In the storage failover command, what does the bypass-optimization option do?
A. It takes over the partner node without performing aggregate relocation.
B. It migrates all logical interfaces during takeover.
C. It takes over without migrating all logical interfaces.
D. It takes over the partner node performing aggregate relocation.
Answer: A
A customer¡¯s Linux Oracle database requires a SAN solution with multiple FC connections for path resiliency and performance. The host has been provisioned with two dual-port FC HBAs, and each HBA is connected to each fabric.
Before configuring the storage, what host information should the storage administrator obtain from the customer? (Choose two.)
A. if the FC HBAs ports are all configured for an active/passive configuration.
B. the amount of cache memory installed in the host
C. if the DM-MP with ALUA support is configured on the host
D. the WWPNs of all the FC ports in the host
Answer: C,D
A customer has LUNs that are being accessed through iSCSI. The applications have experienced increased LUN latency over the last couple of days.
Which two components should you review to determine what caused the rise in latency? (Choose two.)
A. node CPU utilization
B. FC switch performance
C. Ethernet network performance
D. cluster management switch performance
Answer: A,C
Which NetApp management tool generates reports on volume storage capacity trending information?
A. Virtual Storage Console
B. OnCommand Unified Manager
C. OnCommand System Manager
D. OnCommand Workflow Automation
Answer: B
Clustered Data ONTAP supports which three versions of NFS? (Choose three.)
A. NFSv4.1
B. NFSv4
C. NFSv3
D. NFSv2
E. NFSv1
Answer: A,B,C
When assigning shelf IDs to SAS-connected shelves, which statement is true?
A. They only need to be unique within an HA pair.
B. They only need to be unique within a stack.
C. They only need to be unique within a node.
D. They need to be unique within a cluster.
Answer: A
Which command would you use to disable an account in clustered Data ONTAP?
A. security login lock
B. security login policy
C. security login domain-tunnel
D. security login modify
Answer: A
You create an SVM named svm7. Its DNS name is ntap7. In svm7, you create a volume named vol1 with a junction path of /users.
An NFS client would mount the root of vol1 using which path?
A. svm7:/users
B. ntap7:/users
C. ntap7:/vol1
D. svm7:/vol1
Answer: B
Your company just purchased four additional FAS8060 nodes to add to an existing 12-node NAS cluster made up of FAS6290s.
After joining the four new nodes, how many more nodes are allowed before you reach the maximum supported configuration for a mixed FAS6290/8060 cluster?
A. 8
B. 2
C. 4
D. 16
Answer: A
If you also use Passtcert Netapp Certification NS0-158 exam questions pdf, we can give you 100% guarantee of success. If you do not pass the exam, we will refund the full purchase cost to you. For the vital interests of the majority of candidates, Passtcert is absolutely trustworthy.If you have decided to participate in the Network Appliance NS0-158 exam, Passtcert is here. We can help you achieve your goals.
Comments
Post a Comment